IV and Lifetime Software with MPPT Tracker
The IV and Lifetime software is developed to control and collect data from the Source Measure Unit systems. It is intended for characterization and lifetime studies of solar cells, measuring IV curves or applying maximum power point tracking (MPPT) under irradiation.
The software automatically extracts the solar cells performance parameters (PCE, Isc, Voc, Fill Factor, MPPV, MMPI, Rsh, Rs).
Maximum Power point tracking (MPPT):
MPPT tracker mode allows to maintain the operation of the solar cell at the MPP. Here the solar cell experiences a realistic scenario where power is extracted – opposed to maintaining the solar cell at open circuit or short circuit. If the MPP changes (e.g the solar degrades or the irradiance/temperature conditions change), the algorithm can find the new MPP without intervention and without running IV curves.
How does it work?
In the infinityPV IV and lifetime software the operator sets a minimum and a maximum voltage (searching range) for the specific channel and activates the Maximum Power Point Tracking (MPPT) mode. The SMU systems then start a P&O (perturbance and observance) MPPT algorithm for that channel. The algorithm changes the output of the channel by a few mVs every second and measures the current at the new point. It then compares the power at the new point with the power at the previous point and decides the direction of the next voltage perturbance.
Downloading the Software
Installing the Software
The software is developed and tested on a Windows 10 PC and requires a third-party driver as described in the manual. Click Here to Download Third-Party Driver From silabs.com
Safety
The user must read and follow instructions for use of the hardware controlled by the application.
Key Features
User-friendly Interface
Free Download and Free updates
Record and Store the Photovoltaic Parameters
Perform Lifetime/Stability Tests
Test Up to 32 Samples Simultaneous
Store Weather Data and Test Conditions
User Accessible Data Formats
Related Products
Source Measure Unit
The infinityPV Source Measure Units offer cutting-edge technology for precise solar cell characterization and research, redefining precision and efficiency in testing.
ISOSun Solar Simulator
The ISOSun is a stable solar simulator that provides homogeneous full light spectrum simulation over a large area with easy implementation of filters, neutral density filters, cooling and wiring.
CalCell Reference Device
The CalCell is reference device that you can use to calibrate the intensity of your solar simulator at the position of your device.